Note: we are no longer using RTK for stage 4 follow-up

• Install GNSS Master app (Android only, N/A for Apple devices)
  • NTRIP Client V2
  • NTRIP port 2101
  • IP address as selected in Trimble R10 base station setup
  • Credentials: admin/password
  • Status -> Mock location
• GNSS -> Bluetooth
  • Pairing PIN: 1234
  • Bluetooth device name: RTK_GNSS_long-number

(Note: put a sticker on the GNSS receivers so the will not mix up, people easily select the one that they already had paired.)

• Android settings
  • Enable developer mode (Settings -> About phone -> Software information -> tap 7x on Build number)
  • In Developer options -> Select mock location app -> GNSS Master

(Note: this cuts off the in-device GPS, so when GNSS RTK receiver is not blootooth tethered, there is no location update for the Andoid device, silently stuck at the last position.)